Support 16 10/100M RJ45 PoE ports and 2 Combo Uplink ports
Each PoE port supports auto detect the powered device
Support IEEE802.3af 15.4W and IEEE802.3at 30W PoE standards
Support each port full rate, full-duplex non-blocking forwarding
Support WEB management and SNMP (optional)
8K MAC learning, 2Mbit storage and forward cache space,15.2G back plane bandwidth
Each RJ45 port adopts anti-high voltage circuit, strengthen the lightning protection and anti-interference ability
Standard 1U rack design, inside fan , better for heat dissipating and installation

Parameter	Specification
Standard	IEEE802.3 10Base-T Ethernet, IEEE802.3u 100Base-TX/FX Fast Ethernet, IEEE802.3ab 1000Base-T, IEEE802.3z 1000Base-SX/LX Gigabit Ethernet, IEEE802.3x Flow control,IEEE802.1q VLAN,IEEE802.1p QoS, IEEE802.1d Spanning Tree, IEEE802.3af,IEEE802.3at
PoE	16 10/100M RJ45 PoE/PSE, support IEEE802.3af 15.4W / IEEE802.3at 30W Working mode:auto detect powered device,stop powering if not PD device
Wavelength	850nm/1310nm/1490nm/1550nm/
Transmission distance	100M fiber,multi-mode:2Km;single-mode:25/40/60/80/100/120Km; single-fiber:25/40/60/80/100/120Km; 1000M Fiber,multi-mode:220m; Single-mode:10/20/40/60/80/100/120Km Single-fiber:10/20/40/60/80/100/120Km CAT5: 100M
Ports	16 10/100M RJ45 ports (POE/PSE); 2 1000M Combo ports
MAC	8K
Buffer memory space	2Mbit
Bit error rate	<1/1000000000
Power	AC110V/220V@50HZ/60HZ
Power consumption	Whole device:8W POE/PSE: maximum247W
Working temperature	Common:-10~60℃
Storage temperature	-40~80℃
Humidity	5%~90% non-condensing
Installation	1U rack
Dimension	44mm (H)×440mm(W)×160mm (D)

16 10/100M PoE Ports 2 Combo Uplink Ports 18 Port Gigabit Switch

EPON OLT