HiOSO Technology Co., Ltd.
HiOSO Technology Co., Ltd. Professional fttx & switch supplier HiOSO takes you to the fiber era! Website:www.hioso.com
Add to Cart
Fast Ethernet Fiber Media Converter 1 Port 10 / 100M 4 Modes Are Selectable
Overview
10/100M Ethernet Fiber Converter is fully in compliance with 10Base-T, 100Base-TX,100Base-Fx and IEEE 802.3x International Standard etc. It can completely compatible with Network Card, Repeaters, HUB and SWITCH etc made by other suppliers, and also providing cost-efficient hardware support to the information transmission between Broad-Band Personal Net, Fiber Optical City Area Net.
Feature
Optical Parameters
| Multimode Fiber: 62.5/125, 50/125, 100/140μm | |
| MM2km orMM5km | Output power: -20-- -18dBm |
| Receiving sensitivity: -31dBm | |
| Distance: 0~2km or 0~5km | |
| Connector: SC(standard)/FC(optional) /ST(optional) | |
| Type: dual-fiber | |
| Wavelength: 850nm/1310nm | |
| Single-mode Fiber: 9/125, 8.3/125, 8.7/125 or 10/125μm | |
| 25km
| Distance: 0~25km |
| Output power:-15~-8dBm (dual-fiber),-14~-8dBm (single-fiber) | |
| Receiving sensitivity: <-34dBm(dual-fiber), <-33dBm(single-fiber) | |
| Connector: SC(standard)/FC(optional) /ST(optional) | |
| Type: single-fiber / dual-fiber | |
| Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
| 40km
| Distance: 0~40km |
| Output power: -10~-5dBm (dual-fiber),-9~-5dBm (single-fiber) | |
| Receiving sensitivity: < -36dBm(dual-fiber),<-33dBm(single-fiber) | |
| Connector: SC(standard)/FC(optional) /ST(optional) | |
| Type: single-fiber / dual-fiber | |
| Wavelength :1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
| 60km | Distance: 0~60km (when less than 15km, use attenuator) |
| Output power: -5~0dBm(dual-fiber),-6~0dbm(single-fiber) | |
| Receiving sensitivity: < -36dBm | |
| Connector: SC(standard)/FC(optional) | |
| Type: single-fiber / dual-fiber | |
| Wavelength: 1310nm/1550nm(single-fiber),1310nm(dual-fiber) | |
| 80km | Distance: 0~80km (when less than 15km, use attenuator) |
| Output power:-8~-2dBm(dual-fiber),-3~3dbm(single-fiber) | |
| Receiving sensitivity: < -36dBm | |
| Connector: SC(standard)/FC(optional) | |
| Type: single-fiber / dual-fiber | |
| Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) | |
| 100km | Distance: 0~100km (when less than 15km, use attenuator) |
| Output power:-6~-1dBm | |
| Receiving sensitivity: < -38dBm | |
| Connector: SC(standard)/FC(optional) | |
| Type: single-fiber / dual-fiber | |
| Wavelength: 1310nm/1550nm(single-fiber),1550nm(dual-fiber) | |
| 120km
| Distance: 0~120km (when less than 15km, use attenuator) |
| Output power:-5~0dBm | |
| Receiving sensitivity: < -38dBm | |
| Connector: SC(standard)/FC(optional) | |
| Type: dual-fiber | |
| Wavelength: 1550nm | |
